Komplettsystem

PMS - Prahm Microcomputer Systeme

Details

PMS-RACKSYS ist ein 3HE Racksystem für bis zu 14 PMS-RACKSYS-Europakarten. Alle Karten sind mit den ARM Cortex M4 und den ARM Cortex M0 als Watchdog ausgestattet. Alle Karten können so parallel Messen, Steuern und Regeln, welches die optimale Realzeitfähigkeit des Gesamtsystems ermöglicht. Alle Karten können über die Backplane über CAN und Bitbus alle ihre EA- und berechnete Daten via UDS- Diagnose miteinander austauschen.
Für die Kommunikation zur Aussenwelt stehen drei Schnittstellen zur Verfügung:
- Industrial Ethernet mit Firewall und gestaffelter Zugriffskontrolle
- Eine USB 2.9- Schnittstelle für die direkte PC-Anbindung
- Ein sehr schneller und realzeitfähiger CAN- Bus und Bitbus
Folgende 12V EAs werden geboten:
- 12 digitale Ein- und 12 Ausgänge
- 16 analoge Ein und 24 Ausgänge

Produktgruppenauswahl

Produktgruppe
Komplettsystem
Embedded Mainboards (Motherboards)
PMS-RACKSYS-Mainboard mit Internet-Anschluss und zur Anbindung der EA- Karten über die Rückwandplatine
Verfügbare Platinenmaße und Formfaktorbezeichnung
100 x 160 mm, Einfach-Europa-Karte
Einsteckkarten (Slot CPU Karten)
Aufsteckbar auf der DIN 41612-Buchse der Rückwandplatine mit CAN und Bitbus
Verfügbare Platinenmaße und Formfaktorbezeichnung
100 x 160 mm, Einfach-Europa-Karte
Backplane-Einsteckkarten für VMEbus oder CompactPCI
Backplane für 19" Gehäuse für Einfach-Europakarten mit CAN Bus, Bitbus, 8 Syncleitungen und 2 Alarmleitungen
Verfügbare Platinenmaße und Formfaktorbezeichnung
425 x 128 mm
Spezielle Single Board Computer (SBC)
PMS-Mainboard, PMS-Digital-EA, PMS Analog-Input, PMS-Analog-Output, PMS-Connection Tester: Alle mit ARM Cortex M4 uController ausgestattet
Verfügbare Platinenmaße und Formfaktorbezeichnung
100 x 160 mm, Einfach-Europa-Karte
Computer/System on Module (COM/SOM)
Alle Single Board Computer sind mit ARM Cortex M4 uController und ARM Cortex M0 (Watchdog) ausgestattet
Verfügbare Platinenmaße und Formfaktorbezeichnung
100 x 160 mm, Einfach-Europa-Karte

Eingesetzte Prozesssoren (Takt):

10 bis 50 MHz
25 MHz und 32,768 Quarze
101 bis 200 MHz
120 MHz Taktung
Mehrprozessorsysteme oder Multicore-CPU
Jede Karte ist mit dem ARM Cortex M4 Microcontroller (Main Controller) und dem ARM Cortex M0 (Watchdog) ausgestattet. Kommunikation über CAN und Bitbus an der Rückwandplatine.

Arbeitsspeicherausbau:

Minimaler Arbeitsspeicher
1 MByte Flash, 32 KByte SRAM
Maximaler Arbeitsspeicher
1 MByte Flash, 32 KByte SRAM
Verwendete Speichertypen
Flash und SRAM

Unterstützte Embedded Betriebssysteme:

Linux (Varianten)
OS-9
QNX
RTOS
VxWorks
Windows CE.net
Windows XP embedded
andere Betriebssysteme
PMS-StandOS Realzeit Betriebssystem. Programmierung, Konfigurierung, Download, Debugging und Online Monitoring & Kontrolle auf (I)PCs mit MS-Windows

Allgemeine Schnittstellen

RS485
Bitbus mit UDS Protokoll
USB
USB 2.9
Grafik
Grafische Programmierung in FB & FC
Erweiterungssteckplätze
Auf der Rückwandplatine bis zu 14 Steckplätze
Digitale Eingänge
12 Eingänge, 12V
Digitale Ausgänge
6 mit Clamp-Dioden, 6 galvanisch getrennt
Analoge Eingänge
16 schnelle 12 Bit Eingänge (ADC vom uController)
Analoge Ausgänge
2 schnelle 12 Bit DAC vom uC, 10 10 Bit DAC
Weitere Schnittstellen
8 Synchronisations- und 2 Alarmleitungen

Kommunikations-Schnittstellen:

Ethernet 10 / 100 Mbit/s
Ethernet 1 Gbit/s
FireWire
CANopen
DeviceNet
Interbus
Modbus
Profibus
andere
Ethernet, CAN und Bitbus mit UDS Diagnoseprotokoll

Sonstiges:

Busplatinen (Rückwandbus)
Backplane mit CAN-Bus, Bitbus, 8 Synchronisations- und 2 Alarmleitungen, 12V Stromversorgung und Common-Ground
I/O-Karten
PMS-Mainbord, PMS-Digital EA, PMS-Analog-Input, PMS-Analog-Output, PMS-Connection-Tester, alle mit ARM Cortex M4 Microcontroller
Messkarten
PMS-Mainbord, PMS-Digital EA, PMS-Analog-Input, PMS-Analog-Output, PMS-Connection-Tester, alle mit ARM Cortex M4 Microcontroller
Motion-Control
PMS-Digital EA mit AB und ABC Eingängen am ARM Cortex M4 Microcontroller
andere Karten
ACDC: 220 V Stromversorgung für 12V Gleichspannung und 4,2A Gleichstrom
Zubehör
Komplettes 19" Racksystem mit Chassis, Backplane und 220V nach 12V ACDC

Einsatzfertiges Komplettsystem:

19 Zoll-System
RACKSYS- System komplett mit Chassis, Backplane, ACDC Stromversorgung und allen weiteren Teilen
Mobile Einheit
RACKSYS- System kann optional mit Griffen und Ständern bestückt werden.
weitere Komplettsysteme
PMS-ARCON Realzeit- SPS

Firma

PMS - Prahm Microcomputer Systeme